Select Resources

Use match and exclude to filter and select resources.

The match and exclude filters control which resources policies are applied to.

The match and exclude clauses have the same structure and can each contain only one of the two elements:

  • any: specify resource filters on which Kyverno will perform the logical OR operation while choosing resources
  • all: specify resource filters on which Kyverno will perform the logical AND operation while choosing resources

Resource Filters

The following resource filters can be specified under an any or all clause.

  • resources: select resources by names, namespaces, kinds, label selectors, annotations, and namespace selectors.
  • subjects: select users, user groups, and service accounts
  • roles: select namespaced roles
  • clusterRoles: select cluster wide roles

At least one element must be specified in a match.(any/all).resources.kinds or exclude block. The kind attribute is mandatory when working with the resources element. Wildcards (*) are supported in the match.(any/all).resources.kinds field.

In addition, a user may specify the group and apiVersion with a kind in the match / exclude declarations for a policy rule.

Supported formats:

  • Group/Version/Kind
  • Version/Kind
  • Kind

To resolve kind naming conflicts, specify the API group and version. For example, the Kubernetes API, Calico, and Antrea all register a Kind with the name NetworkPolicy.

These can be distinguished as:

  • networking.k8s.io/v1/NetworkPolicy
  • crd.antrea.io/v1alpha1/NetworkPolicy

Wildcards supported formats:

  • Group/*/Kind
  • */Kind
  • *

Sub-resources may be specified with either a / or . as a separator between parent and sub-resource. For example, Pods/status or Pods.status will match on sub-resources.

When Kyverno receives an AdmissionReview request (i.e., from a validation or mutation webhook), it first checks to see if the resource and user information matches or should be excluded from processing. If both checks pass, then the rule logic to mutate, validate, or generate resources is applied.

Match statements

In any rule statement, there must be a single match statement to function as the filter to which the rule will apply. Although the match statement can be complex having many different elements, there must be at least one. The most common type of element in a match statement is one which filters on categories of Kubernetes resources, for example Pods, Deployments, Services, Namespaces, etc. Variable substitution is not currently supported in match or exclude statements. match statements also require an any or all expression allowing greater flexibility in treating multiple conditions.

In this snippet, the match statement matches on all resources that EITHER have the kind Service with name “staging” OR have the kind Service and are being created in the “prod” Namespace.

 1spec:
 2  rules:
 3  - name: no-LoadBalancer
 4    match:
 5      any:
 6      - resources:
 7          kinds: 
 8          - Service
 9          names: 
10          - "staging"
11      - resources:
12          kinds: 
13          - Service
14          namespaces:
15          - "prod"

By combining multiple elements in the match statement, you can be more selective as to which resources you wish to process. Additionally, wildcards are supported for even greater control. For example, by adding the resources.names field, the previous match statement can further filter out Services that begin with the text “prod-” OR have the name “staging”. resources.names takes in a list of names and would match all resources which have either of those names.

 1spec:
 2  rules:
 3  - name: no-LoadBalancer
 4    match:
 5      any:
 6      - resources:
 7          names: 
 8          - "prod-*"
 9          - "staging"
10          kinds:
11          - Service
12      - resources:
13          kinds:
14          - Service
15      - subjects:
16        - kind: User
17          name: dave

match.any[0] will now match on only Services that begin with the name “prod-” OR have the name “staging” and not those which begin with “dev-” or any other prefix. match.any[1] will match all Services being created by the dave user regardless of the name of the Service. And since these two are specified under the any key, the entire rule will act on all Services with names prod-* or staging OR on all services being created by the dave user. In both match and exclude statements, wildcards are supported to make selection more flexible.

In this snippet, the match statement matches only resources that have the group networking.k8s.io, version v1 and kind NetworkPolicy. By adding Group,Version,Kind in the match statement, you can be more selective as to which resources you wish to process.

1spec:
2  rules:
3  - name: no-LoadBalancer
4    match:
5      any:
6      - resources:
7          kinds:
8          - networking.k8s.io/v1/NetworkPolicy

By specifying the kind in version/kind format, only specific versions of the resource kind will be matched.

1spec:
2  rules:
3  - name: no-LoadBalancer
4    match:
5      any:
6      - resources:
7          kinds:
8          - v1/NetworkPolicy

As of Kyverno 1.5.0, wildcards are supported in the kinds field allowing you to match on every resource type in the cluster. Selector labels support wildcards (* or ?) for keys as well as values in the following paths.

  • match.resources.selector.matchLabels
  • exclude.resources.selector.matchLabels
  • match.any.resources.selector.matchLabels
  • match.all.resources.selector.matchLabels
  • exclude.any.resources.selector.matchLabels
  • exclude.all.resources.selector.matchLabels

Supported formats:

  • *
  • *pattern*
  • *pattern
  • pattern?
  • patte?rn

In the below policy, all resource kinds are checked for the existence of a label having key app.kubernetes.io/name.

 1apiVersion: kyverno.io/v1
 2kind: ClusterPolicy
 3metadata:
 4  name: require-labels
 5spec:
 6  validationFailureAction: audit
 7  background: false
 8  rules:
 9  - name: check-for-labels
10    match:
11      any:
12      - resources:
13          kinds:
14          - "*"
15    preconditions:
16      any:
17      - key: "{{ request.operation }}"
18        operator: Equals
19        value: CREATE
20    validate:
21      message: "The label `app.kubernetes.io/name` is required."
22      pattern:
23        metadata:
24          labels:
25            app.kubernetes.io/name: "?*"

Here are some other examples of match statements.

Match a Deployment or StatefulSet with a specific label

This is an example that selects a Deployment OR a StatefulSet with a label app=critical.

Condition checks inside the resources block follow the logic “AND across types but an OR within list types”. For example, if a rule match contains a list of kinds and a list of namespaces, the rule will be evaluated if the request contains any one (OR) of the kinds AND any one (OR) of the namespaces. Conditions inside clusterRoles, roles, and subjects are always evaluated using a logical OR operation, as each request can only have a single instance of these values.

In the below snippet, kinds and selector are peer/sibling elements, and so they are ANDed together.

 1spec:
 2  rules:
 3    - name: match-critical-app
 4      match:
 5        any:
 6        # AND across kinds and namespaceSelector
 7        - resources:
 8            # OR inside list of kinds
 9            kinds:
10            - Deployment
11            - StatefulSet
12            selector:
13              matchLabels:
14                app: critical

This pattern can be leveraged to produce very fine-grained control over the selection of resources, for example the snippet as shown below which combines match elements that include resources, subjects, roles, and clusterRoles.

Advanced match statement

 1spec:
 2  # validationFailureAction controls admission control behaviors,
 3  # when a policy rule fails:
 4  # - use 'enforce' to block resource creation or modification
 5  # - use 'audit' to allow resource updates and report policy violations
 6  validationFailureAction: enforce
 7  # Each policy has a list of rules applied in declaration order
 8  rules:
 9    # Rules must have a unique name
10    - name: "check-pod-controller-labels"
11      # Each rule matches specific resource described by "match" field.
12      match:
13        resources:
14          kinds: # Required, list of kinds
15          - Deployment
16          - StatefulSet
17          # Optional resource names. Supports wildcards (* and ?)
18          names: 
19          - "mongo*"
20          - "postgres*"
21          # Optional list of namespaces. Supports wildcards (* and ?)
22          namespaces:
23          - "dev*"
24          - test
25          # Optional label selectors. Values support wildcards (* and ?)
26          selector:
27              matchLabels:
28                  app: mongodb
29              matchExpressions:
30                  - {key: tier, operator: In, values: [database]}
31        # Optional users or service accounts to be matched
32        subjects:
33        - kind: User
34          name: mary@somecorp.com
35        # Optional roles to be matched
36        roles:
37        # Optional clusterroles to be matched
38        clusterRoles: 
39        - cluster-admin

Match Deployments in Namespaces using labels

This example selects Deployments in Namespaces that have a label type=connector or type=compute using a namespaceSelector.

Here, kinds and namespaceSelector are peer elements under match.resources and are evaluated using a logical AND operation.

 1spec:
 2  rules:
 3    - name: check-min-replicas
 4      match:
 5        any:
 6        # AND across resources and selector
 7        - resources:
 8            # OR inside list of kinds
 9            kinds:
10            - Deployment
11            namespaceSelector:
12              matchExpressions:
13                - key: type 
14                  operator: In
15                  values: 
16                  - connector
17                  - compute

Combining match and exclude

All match and exclude conditions must be satisfied for a resource to be selected for the policy rule. In other words, the match and exclude conditions are evaluated using a logical AND operation. Elements in the exclude block follow the same specifications as those in the match block.

Exclude cluster-admin ClusterRole

Here is an example of a rule that matches all Pods excluding those created by using the cluster-admin ClusterRole.

 1spec:
 2  rules:
 3    - name: match-pods-except-cluster-admin
 4      match:
 5        any:
 6        - resources:
 7            kinds:
 8            - Pod
 9      exclude:
10        any:
11        - clusterRoles:
12          - cluster-admin

Exclude kube-system namespace

This rule matches all Pods except those in the kube-system Namespace.

 1spec:
 2  rules:
 3    - name: match-pods-except-admin
 4      match:
 5        any:
 6        - resources:
 7            kinds:
 8            - Pod
 9      exclude:
10        any:
11        - resources:
12            namespaces:
13            - kube-system

Match a label and exclude users and roles

The following example matches all resources with label app=critical excluding the resources created by ClusterRole cluster-admin OR by the user John.

 1spec:
 2  rules:
 3    - name: match-criticals-except-given-rbac
 4      match:
 5        any:
 6        - resources:
 7            kind:
 8            - Pod
 9            selector:
10              matchLabels:
11                app: critical
12      exclude:
13        any:
14        - clusterRoles:
15          - cluster-admin
16        - subjects:
17          - kind: User
18            name: John

Match a label and exclude users

A variation on the above sample, this snippet uses any and all statements to exclude multiple users.

 1spec:
 2  validationFailureAction: enforce
 3  background: false
 4  rules:
 5    - name: match-criticals-except-given-users
 6      match:
 7        all:
 8        - resources:
 9            kinds:
10            - Pod
11            selector:
12              matchLabels:
13                app: critical
14      exclude:
15        any:
16        - subjects:
17          - kind: User
18            name: susan
19          - kind: User
20            name: dave

Match all Pods using annotations

Here is an example of a rule that matches all Pods having imageregistry: "https://hub.docker.com/" annotations.

 1spec:
 2  rules:
 3    - name: match-pod-annotations
 4      match:
 5        any:
 6        - resources:
 7            annotations:
 8              imageregistry: "https://hub.docker.com/"
 9            kinds:
10              - Pod
Last modified June 03, 2022 at 9:10 AM PST: add sub-resource info (fba46d4)